Welcome to ITTSB Forum, extension and content sharing platform of ITTSB.EU Blog

Registration this is Free, to support this Blog please use our donation links available in our Blog page and forum.

Copyright Notice:  All content of this web site this is copyright protected.

Author Topic: Firmware update for U1273A Agilent DMM - Rev 1.95 8/2013  (Read 1867 times)

0 Members and 1 Guest are viewing this topic.

Offline Kiriakos GR

  • Administrator
  • Hero Member
  • *****
  • Posts: 2235
  • Country: gr
    • ittsb.eu
  • job title: Industrial Maintenance Electrician
Firmware update for U1273A Agilent DMM - Rev 1.95 8/2013
« on: December 11, 2013, 02:18:36 AM »
Firmware revision updates:
Version 1.95 fixed an issue present in the previous release.
The Filter setup menu item was amended to include 3 options: DC, DCAC and OFF. The factory default option is set to DC to enable Filter during DC measurement.
The Filter function attenuates AC signals to help you read the correct DC measurement from a mixed signal.

Version 1.64 - Initial release


How to inspect your firmware version ?
Press Null/Scale button and power up the meter, release the button after 2 seconds.

Caution:  set the DMM to 9600 Baud-rate or the software will not detect it

WWW.ITTSB.EU   Industrial Test Tools Scoreboard  (Product Reviews Blog) / Editor in Chief.



Blog YouTube facebook twitter PayPal Donate Link

ITTSB Blog Sponsors

protosnet.com - Internet solutions

2017 Review samples received by

HIOKI EE Corporation - Japan Times Electronics ltd UK Vishay Foil Resistors POWERTRON resistors - VPG DER EE Electrical Instrument Co., Ltd.