Welcome to ITTSB Forum, extension and content sharing platform of ITTSB.EU Blog

Registration this is Free, to support this Blog please use our donation links available in our Blog page and forum.

Copyright Notice:  All content of this web site this is copyright protected.

Author Topic: Multimeter and digital VFD Filter active at 400Hz (graph of operation)  (Read 156 times)

0 Members and 1 Guest are viewing this topic.

Offline Kiriakos GR

  • Administrator
  • Hero Member
  • *****
  • Posts: 2236
  • Country: gr
    • ittsb.eu
  • job title: Industrial Maintenance Electrician
Several quality multimeter they come with VFD filter or this also described as Low Pass filter.

Filters are useful to suppress harmonics, and actually unwanted harmonics.
In the application of variable frequency drives (motor speed control units) at 400 Hz max operating frequency, any higher signal above 400 Hz mark this is unwanted.
Reliable voltage measurements should be made by Filter this set to active state.

In the market they are several VFD controllers, max operating frequency this can be 100Hz or 200Hz or 400Hz.
Most to all multimeter manufacturers they design or use digital filters them aiming 400 Hz systems.

Bellow there is a graph of operation of such a digital filter this used by HIOKI DT4282
WWW.ITTSB.EU   Industrial Test Tools Scoreboard  (Product Reviews Blog) / Editor in Chief.



Blog YouTube facebook twitter PayPal Donate Link

ITTSB Blog Sponsors

protosnet.com - Internet solutions

2017 Review samples received by

HIOKI EE Corporation - Japan Times Electronics ltd UK Vishay Foil Resistors POWERTRON resistors - VPG DER EE Electrical Instrument Co., Ltd.