ITTSB.EU Blog Forum

Electrical Metrology | Measurement Tips & Products | Calibration standards => Electrical Metrology for enthusiast => Topic started by: Kiriakos GR on March 12, 2013, 07:19:44 PM

Title: 2010: DIY decade resistors box with build in reference DC source. By Kiriakos
Post by: Kiriakos GR on March 12, 2013, 07:19:44 PM

This an 100% personal and made in Greece project.
It worth to be shared with your friends too.
Regards.

https://www.ittsb.eu/Kiriakos-Decade-Resistors-Box.html

Title: Re: 2010: DIY decade resistors box with build in reference DC source. By Kiriakos
Post by: giorgos on March 12, 2013, 08:12:28 PM

I have already seen your project, since you made the first presenation of it. It was very useful for veryfing multimeters. The most critical point for projects like this(except resistors) is the quality of rotary switch, and your selection for theese was right. About artwork, i use the same method in my projects, HP premium photo paper matte, and then i use a clear vanish spray to protect the paper from moisture and scratches, so the final result is very good. You can see (as far photo quality allows it) the result in a homemade power supply and a counter at the following photo.

Title: Re: 2010: DIY decade resistors box with build in reference DC source. By Kiriakos
Post by: Kiriakos GR on June 23, 2017, 10:32:28 AM

For DIY printed labels I just discovered A4 Self Adhesive Glossy Photo Inkjet Paper.

I did order some so to try it.

http://www.ebay.com/sch/m.html?_odkw=&_ssn=digiextras_uk&item=371201071186&_osacat=0&ssPageName=STRK%3AMEBIDX%3AIT&_from=R40&_trksid=p2046732.m570.l1313.TR0.TRC0.H0.TRS0&_nkw=A4+Self+Adhesive+Glossy+Photo+Inkjet+&_sacat=0 (http://www.ebay.com/sch/m.html?_odkw=&_ssn=digiextras_uk&item=371201071186&_osacat=0&ssPageName=STRK%3AMEBIDX%3AIT&_from=R40&_trksid=p2046732.m570.l1313.TR0.TRC0.H0.TRS0&_nkw=A4+Self+Adhesive+Glossy+Photo+Inkjet+&_sacat=0)

It comes with hard to believe specifications: Anti Smudge and Water Resistant