!!

Welcome to our Forum, extension and content sharing platform of Electrical Test and Measurement Product Reviews Blog.

 
Registration this is Free, we accept contributors of 17 years old and above. We do not accept registration with Gmail

Active since 7 June 2012  


Copyright Notice: Entire ITTSB.EU content & images they are copyright protected. - Forum search engine disabled to Guests - No need of you using Adblock software.

Author Topic: 12V MF Battery Charge Tester LM358 - Three LED Pre-Test function  (Read 2769 times)

0 Members and 1 Guest are viewing this topic.

Online Kiriakos GR

  • Administrator
  • Hero Member
  • *****
  • Join Date: May 2012
  • Location: Greece
  • Posts: 2203
  • Country: gr
    • ittsb.eu
  • job title: Industrial Maintenance Electrician
Bellow it is the quick presentation of 12V MF Battery Charge Tester, that is on-board over the battery.

Specific PCB was over a YUSUBA YTX4L (iGEL) 12V 4Ah /10HR.

Three LED indicators:
RED / Low = 12.1V or Less ---  test current 12mA
Yellow / Charge = 12.5V ---  test current 16mA
Green / Good = 12.8V or more ---  test current 16~21mA

29 uA (constant PCB consumption)

Hart of the circuit IC, this is LM358
R10 missing or never installed.


My upcoming project, this is finding a way so to reuse it.

Photographs bellow. 

   
WWW.ITTSB.EU   Industrial Test Tools Scoreboard  (Product Reviews Blog) / Editor in Chief.
The content of this Web site is copyright protected

Online overvolt

  • Industrial installer Electrician
  • Global Moderator
  • Full Member
  • *****
  • Join Date: May 2012
  • Posts: 98
  • Country: gr
Re: 12V MF Battery Charge Tester LM358 - Three LED Pre-Test function
« Reply #1 on: May 19, 2023, 09:35:55 AM »
Three LED indicators:
RED / Low = 12.1V or Less ---  test current 12mA
Yellow / Charge = 12.5V ---  test current 16mA
Green / Good = 12.8V or more ---  test current 16~21mA

I do not get it, what such a low test current this is going to prove?

Online Kiriakos GR

  • Administrator
  • Hero Member
  • *****
  • Join Date: May 2012
  • Location: Greece
  • Posts: 2203
  • Country: gr
    • ittsb.eu
  • job title: Industrial Maintenance Electrician
Re: 12V MF Battery Charge Tester LM358 - Three LED Pre-Test function
« Reply #2 on: May 20, 2023, 12:51:03 AM »
Three LED indicators:
RED / Low = 12.1V or Less ---  test current 12mA
Yellow / Charge = 12.5V ---  test current 16mA
Green / Good = 12.8V or more ---  test current 16~21mA

I do not get it, what such a low test current this is going to prove?

This is patented Chinese technology,  that us westerns we are unable to fully understand.
Lets simply think of it as basic voltage lever detector.  (No other magical properties).   :)
WWW.ITTSB.EU   Industrial Test Tools Scoreboard  (Product Reviews Blog) / Editor in Chief.
The content of this Web site is copyright protected

Offline Andrew-88

  • Full Member
  • ***
  • Join Date: May 2017
  • Posts: 125
  • Country: gr
  • job title: Electrician
Re: 12V MF Battery Charge Tester LM358 - Three LED Pre-Test function
« Reply #3 on: May 28, 2023, 06:55:12 PM »
With out the push button, it could also be converted to a pen type tester  ;)

Online overvolt

  • Industrial installer Electrician
  • Global Moderator
  • Full Member
  • *****
  • Join Date: May 2012
  • Posts: 98
  • Country: gr
Re: 12V MF Battery Charge Tester LM358 - Three LED Pre-Test function
« Reply #4 on: May 29, 2023, 01:59:00 PM »
With out the push button, it could also be converted to a pen type tester  ;)

This is actually a good idea !!

 

ITTSB.EU Blog

General Data Protection Regulation GDPR ITTSB.EU Home Page Reward us by a Donation - Sponsorship TsDMMViewer Data Logger for FLUKE 884xA

ITTSB Blog - Sponsors

protosnet.com - Internet solutions FLUKE benchtop DMM Repair Services

Recommended Links

Hellenic Accreditation System E.SY.D. Portal of city Volos - Greece Clean Up and Customize Facebook Firefox Backup Tool 32bit / 64 bit Winaero Tweaker = Win7 Fonts size fix