!!

Welcome to our Forum, extension and content sharing platform of Electrical Test and Measurement Product Reviews Blog.

 
Registration this is Free, we accept contributors of 17 years old and above. We do not accept registration with Gmail

Active since 7 June 2012  


Copyright Notice: Entire ITTSB.EU content & images they are copyright protected. - Forum search engine disabled to Guests - No need of you using Adblock software.

Author Topic: Hot glue gun STEINEL Gluematic 3002  (Read 4640 times)

0 Members and 1 Guest are viewing this topic.

giorgos

  • Guest
Hot glue gun STEINEL Gluematic 3002
« on: July 31, 2014, 07:58:37 AM »
One of the tools that I mostly use, is hot glue gun.
It is very useful for me in many applications, especially when I want to mount alarm cables in wall corners.
I was own a STEINEL gluematic 3002 gun since 2003, which is still full functional although it has worked many many hours....
Unfortunately one day, it felt down from a ladder where I was on, and a small piece of plastic that holds its external housing, broke.
For first aid I use a copper wire to hold the housing of the gun, in order to finish my job.
But the time for replace it has come...
I had not have to think for other choices, because this model was excellent for me. So I bought the same model again for 20 Euros.
Also I bought an extra long nozzle for it ,which is very useful when you want to reach narrow areas.

Online Kiriakos GR

  • Administrator
  • Hero Member
  • *****
  • Join Date: May 2012
  • Location: Greece
  • Posts: 2204
  • Country: gr
    • ittsb.eu
  • job title: Industrial Maintenance Electrician
Re: Hot glue gun STEINEL Gluematic 3002
« Reply #1 on: August 01, 2014, 11:26:57 PM »
Does the Hot glue dripping when the gun is set to it stand?

My gun does that, so there is no chance to leave it unattended.
WWW.ITTSB.EU   Industrial Test Tools Scoreboard  (Product Reviews Blog) / Editor in Chief.
The content of this Web site is copyright protected

giorgos

  • Guest
Re: Hot glue gun STEINEL Gluematic 3002
« Reply #2 on: August 02, 2014, 08:28:43 AM »
It doesnt dripping, because nozzle has a mechanism inside like a valve.
When you press the trigger and glue has more pressure, the valve opens and allows the way out of glue.

 

ITTSB.EU Blog

General Data Protection Regulation GDPR ITTSB.EU Home Page Reward us by a Donation - Sponsorship TsDMMViewer Data Logger for FLUKE 884xA

ITTSB Blog - Sponsors

protosnet.com - Internet solutions FLUKE benchtop DMM Repair Services

Recommended Links

Hellenic Accreditation System E.SY.D. Portal of city Volos - Greece Clean Up and Customize Facebook Firefox Backup Tool 32bit / 64 bit Winaero Tweaker = Win7 Fonts size fix