BOCHEN WXD3-13 vs 3590S ( Review - comparison) Precision Wirewound Potentiometer

Welcome to our Forum, extension and content sharing platform of Electrical Test and Measurement Product Reviews Blog.

Registration this is Free, we accept contributors of 17 years old and above. We do not accept registration with Gmail

Active since 7 June 2012

Copyright Notice: Entire ITTSB.EU content & images they are copyright protected. - Forum search engine disabled to Guests - No need of you using Adblock software.

Kiriakos GR:
For now this topic this is mostly an announcement of upcoming comparison of BOCHEN vs BOCHEN products differences.

Both low-cost Wire wound Potentiometer they do come from the same source, both are 10 turn (multi-turn) pot .
a) Type 3590S this is advertised as Precision one.
b) Type WXD3-13 this is advertised as regular ten turn pot.

Unfortunately BOCHEN Home page this is a poorly designed website.

It is impossible to do side by side comparison of technical specifications.
Due the fact that I have an active project this requiring one 10K multi-turn pot, I did order both pots so I to have the chance of one detailed comparison.

Type WXD3-13 seems capable for accepting maintenance, but due my experiences I am aware that when such a pot this goes bad ... Then there is no after life for it :P

Back in time BOURNS this was the holly-grail of (multi-turn) pot, but nowadays for non critical applications I do prefer alternatives.
I am starting to believe that BOURNS Mexico printing has copied so many times in China that now we all using BOCHEN factory products with out us to be aware of it.

Kiriakos GR:
It looks like that we do not live in to a perfect world. :D

3590S which I received this is stamped as Bourns and works great, actually I did use it at my LM317 project

From the other hand, BOCHEN WXD3-13 that I got it is an BOCHEN WXD3-13, at my first test at about 2/3 of inner parts travel I did spot mechanical noise an very specific setting.
While this potentiometer it does work, this incident of moving parts to scratching it other it did alert me and I asked from the seller for a new replacement.
I am currently waiting for new replacement so to make my mind regarding bellow questions.

a) Did I receive a bad apple ?
b) Are these apples problematic due product design or due poor quality control?

Currently I do assume that in about ten days I will have my answers.

Kiriakos GR:
End of story. :(

Second received BOCHEN WXD3-13 (this send to the seller directly from the factory ) this also have defects, at single travel one direction run this has one issue, at reverse direction in two spots moving parts they are scratching it other.

In conclusion: BOCHEN factory work this is a bad joke, if you need such potentiometer give your vote to Bourns alternatives.

Kiriakos GR:
I thought to give Bochen a third chance, mostly because of 5% tolerance specification and because similar multi-turn from Vishay and Contelec they are extremely overpriced at retail channels.
Starting from 25 ~ 65 Euros for a single pot this is act of War against consumers. ???

My new testing application for BOCHEN WXD3-13 this is for it to work as voltage reference Trim Circuit.
And now I hope to see minor temperature coefficient drift in comparison to 3296 trim-pot clones that you can buy more than ten with a single Euro coin.

Generally speaking I did some extended homework regarding precision potentiometer, in some cases the current this passing from the wiper this should be limited and to follow manufacturer specifications.
I am currently unaware of 3296 trim-pot and clones Max allowed current this passing from the wiper.
From the other hand BOCHEN WXD3-13 this is a 2W monster and the application of voltage reference Trim Circuit, this is actually a Zero load application for it.

I have just finished my circuit modification, now I am waiting for my air-tight voltage reference circuit to thermally stabilize, soldering heat to equalize with current room temperature that is 27 Celsius.
Two hours later I will perform a final adjustment, then I will monitor over all voltage stability for three days, only then I will be able to say if I am happy or not with the results. :)

xavier60:
I'm having trouble with the cheap 3590S 10K Pots from ebay sellers. After some use, the resistance element goes open circuit.
This is bad when the Pots are used in a bench power supply as the voltage set point will jump from 0V to full reference voltage as the wiper passes over the break. Has anyone had the same type of failure?
I'm now using WXD3-12 10K Pots, hoping that they are better.