!!
ITTSB Blog Specific > ITTSB - Small projects by Kiriakos & User reviews
12V MF Battery Charge Tester LM358 - Three LED Pre-Test function
(1/1)
Kiriakos GR:
Bellow it is the quick presentation of 12V MF Battery Charge Tester, that is on-board over the battery.
Specific PCB was over a YUSUBA YTX4L (iGEL) 12V 4Ah /10HR.
Three LED indicators:
RED / Low = 12.1V or Less --- test current 12mA
Yellow / Charge = 12.5V --- test current 16mA
Green / Good = 12.8V or more --- test current 16~21mA
29 uA (constant PCB consumption)
Hart of the circuit IC, this is LM358
R10 missing or never installed.
My upcoming project, this is finding a way so to reuse it.
Photographs bellow.
overvolt:
--- Quote from: Kiriakos GR on May 18, 2023, 11:48:19 AM ---Three LED indicators:
RED / Low = 12.1V or Less --- test current 12mA
Yellow / Charge = 12.5V --- test current 16mA
Green / Good = 12.8V or more --- test current 16~21mA
--- End quote ---
I do not get it, what such a low test current this is going to prove?
Kiriakos GR:
--- Quote from: overvolt on May 19, 2023, 09:35:55 AM ---
--- Quote from: Kiriakos GR on May 18, 2023, 11:48:19 AM ---Three LED indicators:
RED / Low = 12.1V or Less --- test current 12mA
Yellow / Charge = 12.5V --- test current 16mA
Green / Good = 12.8V or more --- test current 16~21mA
--- End quote ---
I do not get it, what such a low test current this is going to prove?
--- End quote ---
This is patented Chinese technology, that us westerns we are unable to fully understand.
Lets simply think of it as basic voltage lever detector. (No other magical properties). :)
Andrew-88:
With out the push button, it could also be converted to a pen type tester ;)
overvolt:
--- Quote from: Andrew-88 on May 28, 2023, 06:55:12 PM ---With out the push button, it could also be converted to a pen type tester ;)
--- End quote ---
This is actually a good idea !!
Navigation
[0] Message Index