!!

Welcome to our Forum, extension and content sharing platform of Electrical Test and Measurement Product Reviews Blog.

 
Registration this is Free, we accept contributors of 17 years old and above. We do not accept registration with Gmail

Active since 7 June 2012  


Copyright Notice: Entire ITTSB.EU content & images they are copyright protected. - Forum search engine disabled to Guests - No need of you using Adblock software.

Author Topic: Multimeter test leads how-to cleaning to avoid conductive contamination  (Read 5526 times)

0 Members and 2 Guests are viewing this topic.

Online Kiriakos GR

  • Administrator
  • Hero Member
  • *****
  • Join Date: May 2012
  • Location: Greece
  • Posts: 2287
  • Country: gr
    • ittsb.eu
  • job title: Industrial Maintenance Electrician
Over time all multimeter tests leads over their body and cables they get dirty, black spots and grey smooches those are signs of conductive contamination.

Under a microscope all this contamination now it is visualized and the true picture this is millions of conductive particles.
They could be in the form of metallic particles dust this mixed with oil from your own hands, or even worst them be mixed with lubrication oil for heavy machinery.

Another contamination source this is carbon brushes used in electrical motors, also this dust it is highly conductive.

When conductive contamination is high, tests leads isolation properties gets really low and hazard of electrocution get high.

I would suggest if you’re electrical applications are several, it is wise having several pair of test leads.
One will be kept always clean and this will serve for Mains and three phase voltage measurements’ or up to 1000V measurements, and another test leads pair this for regular troubleshooting and electronic components measurements’.


Cleaning
The exterior of the test leads should be cleaned with a good bath in soap water, and after drying (over night) a soft cloth moistened with isopropyl alcohol, this will remove any remaining contamination.

Cleaning of test leads metallic outer surface this is possible also by a soft cloth moistened with isopropyl alcohol, but also there is and a second suggestion for test leads them not looking as new any more.
There is available a small pen this loaded with fibber glass brush, this removes any carbon deposits’ over metallic surface, and also removes oxidation with out damaging any special coating over a metal surface ( For example: gold plated contact points).   

In conclusion take good care of your test leads and any of your test leads accessories, they are your shield against electrocution, and never forget this detail.
WWW.ITTSB.EU   Industrial Test Tools Scoreboard  (Product Reviews Blog) / Editor in Chief.
The content of this Web site is copyright protected

 

ITTSB.EU Blog

General Data Protection Regulation GDPR ITTSB.EU Home Page Reward us by a Donation - Sponsorship TsDMMViewer Data Logger for FLUKE 884xA

ITTSB Blog - Sponsors

protosnet.com - Internet solutions FLUKE benchtop DMM Repair Services

Recommended Links

Hellenic Accreditation System E.SY.D. Portal of city Volos - Greece Clean Up and Customize Facebook Firefox Backup Tool 32bit / 64 bit Winaero Tweaker = Win7 Fonts size fix