ITTSB.EU Blog Forum
Soldering tools | Miscellaneous hand tools | Bench top tools => Miscellaneous hand tools, Workbench improvements => Topic started by: Kiriakos GR on December 15, 2012, 10:04:57 PM
-
I just found one link from Poland with some nice designs about modern work bench.
Just click on those pdf. ;)
http://www.ndn.com.pl/index.php?id_dzialu=59&id_firmy=44 (http://www.ndn.com.pl/index.php?id_dzialu=59&id_firmy=44)
-
Oh yes the Hera stuff...... Thy are pretty well known here in germany (we had them....much older of course) in our school, too.
Nicely organized and Modular (Powersupplies, Power Sockets, Frames for oscilloscope and so on)...but the stuff is really expensive.
So for your home-lab it's too much I would say.
The manufacturer is here:
http://www.hera.de/index.php?id=&L=1
If I had the space and a lot of money.......well, yes........So I will keep using the kitchen table and so on ;)
-
Well personally it happens to be an all-around handy man, which translates that I have some basic knowledge and training about working with metal and wood, thanks to my father.
My work bench needs an upgrade, the digital tools become so many, and I need to reorganize everything, plus I need to make some "safe" space for an oscilloscope (dedicated cabinet on the the bench ).
And I do need some fresh ideas.
After the beginning of 2013 I will start an active planning about the changes that I need. :)
But I think that at in the end I will use ideas from those pictures.
-
Hello Kiriakos, congratulations for your site. Its my first post and I would like to forgive me because my English is not good enough.
About this thread now, very interesting site and also very functional benches.
My home workbench is rather poor , because it is completely hand made. But Im planning to improove it, because as time goes by, the requirements about my job, are getting bigger.
Allow me to post some images from my bench, and I think thats a good idea for any members of this forum to post their pictures from their benches, in order to share ideas and knowledge about workbench manufacturing
-
@ Kiriakos: I would say DIY ;)!!!!
Saves you a lot of money and you can really build it the way you like or need it to be. Would be my choice as well if I had the space.
Frame made of metal and painted, and the racks/inserts made of Wood. Then painted.....
Sadly enough....we have a welder, a compressor, painting guns, a sandblaster, a soda-blaster, a DIY painting chamber and at all the stuff....but no space for an Electronics Lab around (my brother occupies every inch in our cellar with spare parts and so on).
Well, in my flat where I stay most times there is really no space in any way for that stuff..... So I have to stay in my backpack and so on ;)
@Giorgos: Your bench is not poor in any way! I really like the work. Organized and clean. Maybe not as fancy as those in the catalogue, but very nice!
I am just missing the safety-off for a proper lab-bench (at least here they are obligatory) ;) http://www.tischer-fahrzeugbau.de/cms/upload/Ersatzteile/Beleucht_und_Elektrik/25-0215_Not-Aus_Taster.jpg
-
It looks that I am starting to receive some competition about the work bench subject. ;D
Well this is my cave prior getting involved with multimeter reviews and samples.
23 April 2010.
Always I was loaded with tools. ;)
@Giorgos if you use perfect English spelling in this forum you are violating the forum rules ;D ;D
-
@ Kiriakos: I would say DIY ;)!!!!
Saves you a lot of money and you can really build it the way you like or need it to be. Would be my choice as well if I had the space.
Frame made of metal and painted, and the racks/inserts made of Wood. Then painted.....
Sadly enough....we have a welder, a compressor, painting guns, a sandblaster, a soda-blaster, a DIY painting chamber and at all the stuff....but no space for an Electronics Lab around (my brother occupies every inch in our cellar with spare parts and so on).
Well, in my flat where I stay most times there is really no space in any way for that stuff..... So I have to stay in my backpack and so on ;)
welder 35A-135A (real one full copper)
compressor 140 Lts & painting guns too.
DIY painting chamber? .. my only problem.
And I also have Oxy-Acetylene welding/cutting system.
About wood work I have also lots of power tools.
But the most important in such DIY is the planing on paper, I did it in the past and I will do it again with the help of Coreldraw software. ;)
-
Im just rated this topic with one star instead for 5 stars by mistake. Please fix it if its possible.
-
Im just rated this topic with one star instead for 5 stars by mistake. Please fix it if its possible.
Not possible, I do not have control about topic rating.
The next vote will balance things up. :)
-
I have started remodeling my work bench from about end of July, actually I am testing and trying to improve things by moving my equipment around. ;D
I took some pictures to share, for now it looks good, if my personal finance condition improve in the future, I would probably bring in a carpenter so to give me a hand.
-
I realize that my mistake in rating ,was the reason to reactivate this interesting topic ;)
By watching your pictures, I can see that you can raise the level of the right bench to be equal with the other.
By this way you will get an extra storage space (under the right bench) where you can put drawers too.
Also an improvement with low cost is to put shelves placed in adjustable brackets, from edge to edge of bench.
(like this http://www.shopfittings-ltd.co.uk/acatalog/Twin-Slot-Display.html)
Anyway the final choice is yours , because anyone create his work enviroment according to his preferences .
-
I am almost ready to follow your advice, after remodeling everything and also after of 24 hours of non stop work (cutting woods, drilling and a bit of painting) I manage to transform this old metallic TV set stand, in to something new. 8)
The results are so great than now I am having space for two additional 8 1/2 digits multimeter ;D ;D
-
Hey this is an historic moment 8)
This last update is going to stay as is for many years ahead.
While was not easy to gather all needed material at zero cost, and to consult my self over and over about finding the best place of where its one equipment will be placed, so to be easy to use and see when seating in a chair,
now I am ultra proud for what I did. ;)
And I did organize a small fiesta too by inviting all ITTSB samples, so to chat by its other and have fun too. :P
-
Great upgrade. Congratulations!
Now your instruments are concentrated at the left part of bench,and tools at right. By this way your bench is more functional than before, so I wish you to enjoy it.
I saw that you rounded the corner of left bench,so maby you will lost some valuable space, but anyway you know better what to do.
I can observe in first picture a metallic ladder over your bench, so you have to watch your head! ;)
-
In the last three days I had some incoming work regarding repairs which acted as benchmark of how easy is now to work on the new workbench, by the new setup my productivity it did increased. :)
I had to make that corner round as safety measure against injuries from the corner, the loss in square centimeter is not that significant.
The ladder is part of the scenery ;D the part that is at the height of my head is covered by soft rubber all ready.
In summary I will say that my new redesigned workbench is a huge success.