!!

Welcome to our Forum, extension and content sharing platform of Electrical Test and Measurement Product Reviews Blog.

 
Registration this is Free, we accept contributors of 17 years old and above. We do not accept registration with Gmail

Active since 7 June 2012  


Copyright Notice: Entire ITTSB.EU content & images they are copyright protected. - Forum search engine disabled to Guests - No need of you using Adblock software.

Author Topic: Vishay VHP203 0.0023% resistor a travel at minus 20 Celsius and back at 15C  (Read 3585 times)

0 Members and 1 Guest are viewing this topic.

Offline Kiriakos GR

  • Administrator
  • Hero Member
  • *****
  • Join Date: May 2012
  • Location: Greece
  • Posts: 2202
  • Country: gr
    • ittsb.eu
  • job title: Industrial Maintenance Electrician
Few years back I did receive one Vishay VHP203  0.0023% 500R which was not at actual specifications.
The arrived resistor was at 500R but minus 0.004%  and therefore I did request an replacement which I did receive.

Even so this superior resistor where unused for several years and now that I am at making a new set of calibration test accessories, I am going to use it. :)

VHP 203 product Series this aiming metrology applications, operating range this is minus 50C up to 150C.
I has full of curiosity of what will change if I misused a bit  :)  by sending it to minus 20C for 12 hours.

I did use my 8846A so this to monitor the defrosting period for 2H 30 minutes.
The resistor recovered back at 15 Celsius environmental but true temperature this is 18C because this 8846A this is a source of heat, and part of the heat escapes from the banana plugs.

I have just taken few pictures to share and I will complete my mathematical evaluation later on. 
WWW.ITTSB.EU   Industrial Test Tools Scoreboard  (Product Reviews Blog) / Editor in Chief.
The content of this Web site is copyright protected

Offline Kiriakos GR

  • Administrator
  • Hero Member
  • *****
  • Join Date: May 2012
  • Location: Greece
  • Posts: 2202
  • Country: gr
    • ittsb.eu
  • job title: Industrial Maintenance Electrician
While this story started as Vishay VHP203 benchmark, now it is required of me at bench-marking the 8846A with one of the finest resistors (regarding quality) of our planet.  8)

First new exploration point this is Standard Deviation at 15C for a few minutes.
This is an interesting test for  the 8846A so to discover it internal noise & sensitivity.

While 8846A this is documented as 6 1/2 DMM,  the Stats has 7 1/2 resolution, and SD measurement this collects data from 8 1/2 measuring resolution.
First visual analysis makes known that there is 180 uOhm that is close to 1/5 of a single milli-Ohm. 
WWW.ITTSB.EU   Industrial Test Tools Scoreboard  (Product Reviews Blog) / Editor in Chief.
The content of this Web site is copyright protected

 

ITTSB.EU Blog

General Data Protection Regulation GDPR ITTSB.EU Home Page Reward us by a Donation - Sponsorship TsDMMViewer Data Logger for FLUKE 884xA

ITTSB Blog - Sponsors

protosnet.com - Internet solutions FLUKE benchtop DMM Repair Services

Recommended Links

Hellenic Accreditation System E.SY.D. Portal of city Volos - Greece Clean Up and Customize Facebook Firefox Backup Tool 32bit / 64 bit Winaero Tweaker = Win7 Fonts size fix