!!

Welcome to our Forum, extension and content sharing platform of Electrical Test and Measurement Product Reviews Blog.

 
Registration this is Free, we accept contributors of 17 years old and above. We do not accept registration with Gmail

Active since 7 June 2012  


Copyright Notice: Entire ITTSB.EU content & images they are copyright protected. - Forum search engine disabled to Guests - No need of you using Adblock software.

Author Topic: Indeed neither the best multimeter this can not measure a HV microwave diode  (Read 863 times)

0 Members and 1 Guest are viewing this topic.

Online Kiriakos GR

  • Administrator
  • Hero Member
  • *****
  • Join Date: May 2012
  • Location: Greece
  • Posts: 2321
  • Country: gr
    • ittsb.eu
  • job title: Industrial Maintenance Electrician
Long story in sort, since today I am owner of one working Kenwood K20MSS10E 20L microwave oven. :)

This microwave oven were rescued from be recycled.
The actual problem was bad contact issue at HV circuit.

But K20MSS10E repair this take several hours even in my hands, because I had to inspect everything and anything.

This is my first ever microwave oven repair, and when I was up to test the High Voltage Diode ( CL01-12 ) and or RG203, I were also fooled by my own multimeter, and I thought the diode as open.

At the inspection of the transformer (MD-801EMR-1 230V 50Hz), I did a much better job.
2.5 Ohm the primary
201 Ohm the high voltage
Low side coil resistance this is almost zero.
Three coils tested, no issue with sort to ground.

About the diode, I will say again that I were fooled, due all my DMM.  :P 
But this suggestion bellow, it did helped me too, so to verify that my HV diode this was Good after all.  ;)






-------------------------------------------------------------------------------------------------------------
About my reborn Kenwood K20MSS10E, this is simple to use and very beautiful.
Unfortunately I did not find with it and the glass table, but I did find the base with the wheels.

As fist test I did heat up my coffee cup successfully.    8)

 
 
WWW.ITTSB.EU   Industrial Test Tools Scoreboard  (Product Reviews Blog) / Editor in Chief.
The content of this Web site is copyright protected

Offline Andrew-88

  • Full Member
  • ***
  • Join Date: May 2017
  • Posts: 137
  • Country: gr
  • job title: Electrician
I think that for the ACV version of a tester, the circuit below it can also work, if this modified by the addition of safe to use crocodile clips.

DIY DB3 Diode Tester 220 ~ 230V
https://www.ittsb.eu/forum/index.php?topic=1809.0

 

ITTSB.EU Blog

General Data Protection Regulation GDPR ITTSB.EU Home Page Reward us by a Donation - Sponsorship TsDMMViewer Data Logger for FLUKE 884xA

ITTSB Blog - Sponsors

protosnet.com - Internet solutions FLUKE benchtop DMM Repair Services

Recommended Links

Hellenic Accreditation System E.SY.D. Portal of city Volos - Greece Clean Up and Customize Facebook Firefox Backup Tool 32bit / 64 bit Winaero Tweaker = Win7 Fonts size fix