Welcome to ITTSB Forum, extension and content sharing platform of ITTSB.EU ( Electrical Test and Measurement Product Reviews Blog ).

Registration this is Free, to support this Blog please use our donation links available in our Blog page and forum.  

Active since 7 June 2012  

Copyright Notice:  All content of this web site this is copyright protected. - Forum search engine this is disabled for Guests.  

Author Topic: Electrician work SPOT Light - 2x150W & Ups - calibration load  (Read 718 times)

0 Members and 2 Guests are viewing this topic.

Online Kiriakos GR

  • Administrator
  • Hero Member
  • *****
  • Posts: 2058
  • Country: gr
    • ittsb.eu
  • job title: Industrial Maintenance Electrician
Electrician work SPOT Light - 2x150W & Ups - calibration load
« on: November 26, 2016, 08:13:23 PM »
Electrician work SPOT Light - 2x150W & Ups - calibration load ..
True DIY by professional  8)

I did assembly it  this rainy Saturday afternoon, small and practical, and suitable serving also as ups calibration load for  1000~1500VA or about 900W ones.
Rule of thump ups calibration =  ups to be calibrated with stable load and this to be at 30% of total ups handling load.

Full load = 300W  for  ups at 900W
Half load = 150W  for ups at 450W (true handling load) in VA this could be around 600~700!  ;)

WWW.ITTSB.EU   Industrial Test Tools Scoreboard  (Product Reviews Blog) / Editor in Chief.
The content of this Web site is copyright protected



Blog front page facebook ITTSB Blog - Donate Link General Data Protection Regulation GDPR

ITTSB Blog Sponsors

priniotakis.gr - Electronics division protosnet.com - Internet solutions